Industrial Communication

Industrial Communication

We are the supplier and exporter of Industrial Communication products providing a full range of industrial data acquisition (DAQ) and control products which are widely used in industrial and laboratory applications such as: monitoring, motion control, data acquisition, and automated testing. There are five major categories - PC/104, PCI-bus, ISA-bus, USB-based, and CompactPCI modules including USB modules, PC/104 modules, ISA cards, IO drivers, signal conditioning modules, terminal boards and CompactPCI system. With rich wiring terminals and extensive software support, Advantech provides reliable, efficient, and cost-saving industrial solutions. Moreover, Advantech's DAQ products could simply be bundled with versatile industrial PC chassis, backplanes, CPU modules, flat panel monitors and embedded automation computers


ADAM-4541 Multi-Mode Fiber Optic to RS-232/422/485 Converter

Main Features
  • Easily mounted on a DIN-rail, panel or piggyback
  • Transmission speeds of up to 115.2 kbps
  • Optical fibers enable transmission of 2.5 km (measured with 62.5/125 mm)
  • Half/full-duplex, bidirectional transmission mode
  • Avoids lightning strikes and EMI/RFI interference
  • Prevents damage from electrostatic discharge
  • Stable and error-free data transmission
  • Automatic internal RS-485 bus supervision
  • No external flow control signals required for RS-485
  • Transient suppression and over-current protection on RS-422/485 data lines
  • Reserved space for termination resistors
  • LED for power and data flow indication
  • Power requirement : +10 to + 30 VDC

images/adam-4520.jpg

ADAM-4520 RS232 Converter

Main Features
  • Automatic RS-485 data flow control
  • 3000 VDC isolation protection
  • Surge protection RS-485 data line
  • Transmission speed up to 115.2 kbps
  • Networking up to 1200 meters (4000 feet)
  • Reserved space for termination resistors
  • Power and data flow indicator for troubleshooting
  • Power requirement : +10 to +30 VDC
  • Mounts easily on a DIN-rail and panel/piggyback

images/usb-4604b-converter.jpg

USB-4604B Converter

Main Features
  • Full compliance with USB V 1.1 and V 2.0 specifications
  • RS-232/422/485 port supported
  • Transmission speed up to 921.6 kbps
  • Automatic RS-485 data flow control
  • Bus-powered
  • No need for external power supply
  • Plug & play installation
  • No additional IRQs or I/O ports required
  • Hot swap function support

images/eki-1522-device.jpg

EKI-1522 Device Services

Main Features
  • Provides 2 x 10/100 MBPS Ethernet ports for LAN redundancy
  • Provides COM port redirection (virtual COM), TCP and UDP operation modes
  • Supports baud rate up to 921.6 KBPS
  • Allows a maximum of 5 hosts to access one serial port
  • Allows a maximum of 16 hosts to be accessed as TCP client mode
  • Built-in 15 KV ESD protection for all serial signals
  • Provides rich configuration methods including windows utility, telnet console, and web browser
  • Supports windows 2000/XP/Vista drivers
  • Automatic RS-485 data flow control
  • SNMP MIB-II for network management

images/eki-1352-wireless.jpg

EKI-1352 Wireless Serial Devices Servers

Main Features
  • Link any serial device to an IEEE 802.11 b/g network
  • Supports wireless LAN Ad-Hoc and Infrastructure modes
  • Provides COM port redirection, TCP, UDP, and pair connection modes
  • Supports baud rate up to 921.6 kbps
  • Provides web-based configuration and Windows utility
  • Allows a max. of 5 hosts to access one serial port
  • Supports windows 2000/XP/Vista drivers
  • Allows a max. of 4 hosts to be accessed as TCP client mode
  • Built-in 15 KV ESD protection for all serial signals
  • Supports DHCP protocol

images/adam-4521-rs232.jpg

ADAM-4521 RS232 Converter

Main Features
  • Connectors : 1 x plug-in terminal block (#14 ~ 22 AWG) (RS-422/485) 1 x DB9-F (RS-232)
  • Isolation Voltage : 1,000 VDC
  • Power Consumption : 1.0 W @ 24 VDC
  • Built-in microprocessor and watchdog timer
  • Input : RS-485 (2-wire) or RS-422 (4-wire)
  • Output : RS-232 (4-wire)
  • Speed Modes (bps) : 300, 600, 1,200, 2,400, 4,800, 9,600, 19.2 k, 38.4 k, 57.6 k, 115.2 k (software configurable)
  • RS-232 and 485 can be set to different baud rates
  • RS-485 surge protection and automatic
  • RS-485 data flow control
  • Software configurable to either addressable or non-addressable mode

images/adam-6541-st.jpg

ADAM-6541-ST Fiber Converter

Main Features
  • Supports full/half duplex flow control
  • Supports Integrated Loop-up engine
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Supports +10 ~ 30 VDC voltage power input
  • Provides surge protection (EFT) 3,000 VDC for power line
  • Provides flexible mounting : DIN-rail, panel, piggyback
  • Supports operating temperatures from-10 ~ 65° C
  • Embedded a switch controller-supports auto-negotiation
  • Embedded a memory buffer-supports store and forward transmission

images/adam-6541-fiber.jpg

ADAM-6541 Fiber optic Converter

Main Features
  • Supports 1-port 100 Mbps multimode fiber optics
  • Supports 10 ~30 VDC power input
  • Easily mounted on a DIN-rail, panel or piggyback
  • Supports full/half-duplex fl ow control
  • Supports MDI/MDIX auto crossover
  • Embedded with a switch controller, supports auto-negotiation
  • Embedded with memory buffer, supports store and forward transmission

images/adam-6541-fiber.jpg

ADAM-4522 RS232 Converter

Main Features
  • Automatic RS-485 data flow control
  • Surge protection RS-485 data line
  • Transmission speed up to 115.2 Kbps
  • Networking up to 1200 meters (4000 feet)
  • Reserved space for termination resistors
  • Power and data flow indicator for troubleshooting
  • Power requirement : +10 to +30 VDC
  • Mounts easily on a DIN-rail, panel or piggyback

images/adam-4571-ethernet.jpg

ADAM-4571 Etehrnet Converter

Main Features
  • Supports RS-232/422/485 serial communication
  • Provides 10/100 Mbps auto-sensing Ethernet port
  • Supports baud rate up to 921.6 kbps
  • Provides COM port redirection (Virtual COM), TCP and UDP operation modes
  • Allows a max. of 5 hosts to access one serial port
  • Allows a max. of 16 hosts to be accessed as TCP client mode
  • Supports auto re-connection function
  • Supports Windows 2000/XP/Vista drivers
  • Built-in 15 KV ESD protection for all serial signals
  • Automatic RS-485 data flow control
  • Supports remote update firmware

images/eki-1524-device.jpg

EKI-1524 Device Servers

Main Features
  • Provides 2 x 10/100 MBPS Ethernet ports for LAN redundancy
  • Provides COM port redirection (virtual COM), TCP and UDP operation modes
  • Supports baud rate up to 921.6 KBPS
  • Allows a maximum of 5 hosts to access one serial port
  • Allows a maximum of 16 hosts to be accessed as TCP client mode
  • Built-in 15 KV ESD protection for all serial signals
  • Provides rich configuration methods including windows utility, telnet console, and web browser
  • Supports windows 2000/XP/Vista drivers
  • Automatic RS-485 data flow control
  • SNMP MIB-II for network management

images/eki-1521.jpg

EKI-1521

Main Features
  • Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  • Provides COM port redirection (Virtual COM), TCP and UDP operation modes
  • Supports up to 921.6 kbps, and any baud rate setting
  • Allows a max. of 5 hosts to access one serial port
  • Allows a max. of 16 hosts to be accessed as TCP client mode
  • Built-in 15 KV ESD protection for all serial signals
  • Provides rich configuration methods including Windows utility, Telnet console, and Web Browser
  • Supports Windows 2000/XP/Vista/7, Windows CE, and Linux drivers
  • Automatic RS-485 data flow control
  • Class I division 2 certification

images/eki-1222---modbus-gateway.jpg

EKI-1222-Modbus Gateway

Main Features
  • Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  • Integration of Modbus TCP and Modbus RTU/ASCII networks
  • Supports up to 921.6 kbps, and any baud rate setting
  • Supports up to 16 connections and 32 requests simultaneously
  • Supports 31 slaves per serial port
  • Easy-managing Advantech Serial Device Server Configuration Utility for Windows 2000/XP/Vista/7
  • Auto searching slave ID over configuration utility
  • Software selectable RS-232/422/485 communication
  • Mounts on DIN-rail, wall or panel
  • Built-in 15 KV ESD protection for all serial signals
  • Automatic RS-485 data flow control

images/eki-1221--modbus-gateway.jpg

EKI-1221-Modbus Gateway

Main Features
  • Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  • Integration of Modbus TCP and Modbus RTU/ASCII networks
  • Supports up to 921.6 kbps, and any baud rate setting
  • Supports up to 16 connections and 32 requests simultaneously
  • Supports 31 slaves per serial port
  • Easy-managing Advantech Serial Device Server Configuration Utility for Windows 2000/XP/Vista/7
  • Auto searching slave ID over configuration utility
  • Software selectable RS-232/422/485 communication
  • Mounts on DIN-rail, wall or panel
  • Built-in 15 KV ESD protection for all serial signals
  • Automatic RS-485 data flow control

images/eki-122d---modbus-gateway.jpg

EKI-122D-Modbus Gateway

Main Features
  • Provides 2 x 10/100 Mbps Ethernet ports for Daisy Chian connectivity
  • Integration of Modbus TCP and Modbus RTU/ASCII networks
  • Supports Ethernet auto-bypass function
  • Master mode supports 32 TCP slaves at the same time
  • Slave mode supports up to 16 TCP masters
  • Supports mapping Modbus slave ID option
  • Auto searching Modbus slave ID over configuration utility
  • Mounts on DIN-rail, wall or panel
  • Class I, Division 2 certification

images/eki-1528.jpg

EKI-1528

Main Features
  • 8-port RS-232/422/485 serial communication
  • Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  • Supports up to 921.6 kbps, and any baud rate setting
  • Provides COM port redirection (Virtual COM), TCP and UDP operation modes
  • Provides rich configuration methods : Windows utility, Telnet console, Web Browser, and serial console
  • Built-in 15 KV ESD protection for all serial signals
  • SNMP MIB-II for network management
  • Built-in buzzer for easy location
  • Standard 1U rackmount size
  • Rear wiring
  • Automatic RS-485 data flow control

images/eki-1224-modbus.jpg

EKI-1224 Modbus Gateway

Main Features
  • Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  • Integration of Modbus TCP and Modbus RTU/ASCII networks
  • Supports up to 921.6 kbps, and any baud rate setting
  • Supports up to 16 connections and 32 requests simultaneously
  • Supports 31 slaves per serial port
  • Easy-managing Advantech Serial Device Server Configuration Utility for Windows 2000/XP/Vista/7
  • Auto searching slave ID over configuration utility
  • Mounts on DIN-rail, wall or panel
  • Software selectable RS-232/422/485 communication
  • Built-in 15 KV ESD protection for all serial signals
  • Automatic RS-485 data flow control

images/eki-1526.jpg

EKI-1526

Main Features
  • 16-port RS-232/422/485 serial communication
  • Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  • Supports up to 921.6 kbps, and any baud rate setting
  • Provides COM port redirection (Virtual COM), TCP and UDP operation modes
  • Provides rich configuration methods: Windows utility, Telnet console, Web Browser, and serial console
  • Built-in 15 KV ESD protection for all serial signals
  • SNMP MIB-II for network management
  • Built-in buzzer for easy location
  • Standard 1U rackmount size
  • Rear wiring
  • Automatic RS-485 data flow control

images/isw-514ps.jpg