Wireless Access Points and Client Bridges

Wireless Access Points and Client Bridges

In order to append and respond to the diverse requirements of esteemed clients, we are able to offer Wireless Access Points and Client Bridges. In this range GN - IEEE 802.11 b/g/n Wireless Access Point and IEEE 802.11 A/N Wireless Access Point are few to name. Along with this, our quality experts make sure to inspect the entire assembly of wireless access points and client bridges. Products incorporated in this range are mentioned


EKI-6311- Wireless Access Point

Main Features
  • Compliant with IEEE802.11b/g/n
  • IP55 waterproof certification
  • Embedded 8dBi directional antenna with external N-type connector for optional antenna
  • High output power 26 dBm
  • Passive 12 V POE
  • Support distances up to 5 km
  • WPA/WPA2-enterprise encryption for a highly secure wireless network
  • WEP/WPA/WPA2/ IEEE 802.1 x authentication support
  • Spanning tree and IGMP snooping protocol support

images/rj-45-interface.jpg

Wireless Access Point

Main Features
  • Compliant with IEEE 802.11n wireless technology capable of up to 150 Mbps download / upload data rate
  • Farther coverage, less dead spaces and higher throughput with 802.11n technology
  • Compliant with 802.11b/g standard
  • Supports Wi-Fi Protected Setup (WPS)
  • Supports 64/128/152-bit WEP, WiFi Protected Access (WPA / WPA2, WPA-PSK / WPA2-PSK)
  • AP, Client, Repeater/Universal Repeater, Bridge (Point to Point and Point to Multiple Point), WDS modes supported
  • Supports DHCP Server
  • System monitoring includes active wireless client table
  • User-friendly Web-Based GUI for configuration and SNMP v1/v2c remote management functions
  • Multiple SSID / 802.11Q tagging function
  • Wireless MAC filtering to prevent possible hackers attack

images/Wireless_Access_Points.jpg

Industrial Compliant Wireless LAN & LAN

Main Features
  • Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate
  • Backward compatible with 802.11a standard
  • Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI/ MDI-X supported

images/eki-6331an-wireless-access-point.jpg

Fixed-network Broadband Router

Main Features
  • Supported connection types: Dynamic IP / Static IP / PPPoE / PPTP / L2TP / IPSec
  • Supports Virtual Server, DMZ for various networking applications
  • Supports DHCP Server, UPnP, Dynamic DNS

images/wnap-3000pe-wireless-access-point.jpg

RF Interface Characteristics

Main Features
  • Built-in two N-Type Female Antenna connectors
  • High Output Power up to 500mW with multiple adjustable transmit power control

images/power-supplies-for-transmitters.jpg

Outdoor Environmental Characteristics

Main Features
  • Aluminum Housing, IP67 Protection Grade
  • IEEE 802.3af/at Power over Ethernet design
  • Operating Temperature: -30~75 Degree C

images/triple-output.jpg

EKI- 6331AN Wireless Access Point

Main Features
  • Compliant with IEEE 802.11a/n
  • IP55 waterproof certification
  • MIMO 2 x 2 11n
  • Embedded 16 dBi dual-polarity directional antenna with external R-SMA connector for optional antenna
  • High output power 24 DBM
  • Passive 15V POE
  • Supports distances up to 10 Km
  • WEP/WPA/WPA2/ IEEE 802.1 x authentication support
  • IGMP snooping protocol support

images/1920-watt-ac-dc.jpg

WNAP-3000PE Wireless Access Point

Main Features
  • IEEE 802.11n draft 2.0 compliant with IEEE 802.11b/g
  • Supports PoE port (IEEE 802.3af compliant)
  • Strong network security with WEP, WPA(PSK), 802.1x authentication
  • With 3 detachable RP-SMA connectors for expanding of external antenna connection distance
  • High data transfer rate up to 300 Mbps
  • Five operation modes selectable: AP / AP Client / Wireless Bridge / Multiple Bridge / Repeater Adjustable output power level
  • Supports Multiple SSID, Multiple SSID isolation, 802.1Q VLAN, RADIUS MAC authentication, Rogue AP detection, Access Control
  • Windows-base utility, Web, and CLI (Command Line Interface) Configuration SNMP v1, v2, v3 supported

images/specific-purpose.jpg