Downloads now, the apps are available on the store

Contrary to popular belief, Lorem Ipsum is not simply random text. It has roots in a piece of classical Latin literature from 45 BC, making it over 2000 years old. Richard McClintock, a Latin professor.

available on google play
available on apple store

A02025-11 N/1 Redundant SMPS

HOME
A02025-11 N/1 Redundant SMPS

A02025-11 N/1 Redundant SMPS

Product Details:

Input Voltage Range	195V - 230V AC
Usage/Application	Electronic Instruments
Efficiency	Better than 80%
Output Voltage	30V
Output Current	67A
Load Regulation	1% (300mV from 10% to 100% load change measured on sense terminal
Input Frequency	50Hz
Model Name/Number	A02025-11
Line Regulation	0.2% (60mV)
Power Factor	0.9
Indication	Power ON,DC OK,C/L,I/P U/V,I/P O/V,O/T
Current Limit	70~72A (CC type)
Over Temperature	900 to + 50DegC (Factory Test only)

Features:

10% to 100% load change measured on sense terminal
Ripple & Noise : 0.5% (150mV Pk - Pk when measured with shortest probe lead length and 0.1uF/63V ceramic capacitor paralleled with 100uF/63V electrolytic capacitor across the probe tip.
Output Voltage Adj. : + 2V by front panel Vadj pot
Output Over Voltage : 33V to 35V (Check at 10% load. (trip type) mains recycling required to restart SMPS after removing fault)
Input Under Voltage : (Auto Recovery Type) To be checked at 10% load. Output shuts OFF when input voltage is falls down below 185vac.
Input Over Voltage : (Auto Recovery Type) To be checked at 10% load. Output shuts OFF when input voltage goes beyond 264vac.
Transient Response : Output should recover within 10ms for 50% step load change.
TTL ON / OFF : 0 - OFF; 1 – ON (if required)
1O/P Current Monitoring : Scale : 70A = 10V, 67A = 9.57 (2%)
Operating Temperature: High : 550C Operating. Derating 2.5 % per degree C
beyond 500C output current is58A. (Unit is in OFF condition to be switched ON for last ½ an hour to take the reading), Low : - 10 % Operating. (Unit is in OFF condition to be switched ON for last ½ an hour to take the reading).
EMI / EMC : Will meet STD461
Vibration : 8 – 500Hz, 1.59 peak
Terminations : Input, Output and Logic Signals are on M S Shell connectors Such three units are fitted in 19” * 5U * 420mm (D) (Excluding front and Rear panel projection) subrack with current sharing facility (60:40) and Dual Redundant Diode fitted inside the SMPS