Ethernet based modules

Ethernet based modules

Analog Input Model.Multifunction I/O.Digital I/O.Relay Output & Digital Input.Power Relay Output.


DC Digital Input and Digital Output(ET -6052D)

Main Features
  • Digital Output Channels: 8 (Source)External Power: 12 ~ 45 VDC
  • Output Type: Isolated (N-MOSFET, Open Source)
  • Load Current: 1.4 A/channel
  • Over-Voltage Protection: +48 VDC
  • Direct Drive Power Relay Module Short Circuit Protection and Current Limitation Switching Inductive Loads.

images/can-open-gateway.jpg

Power Relay Output (ET- 6060D)

Main Features
  • Digital Output Channels: 8
  • Output Type: Power Relay, Form A (Normal Open)
  • Operating Voltage Range: 5 ~ 240VAC (47~63Hz) 5 ~ 24VDC
  • Relay Contact Voltage Range: 0~ 250VAC (47~63Hz) 0~ 28VDC
  • Max. Load Current: 3.0 A/channel
  • Max. Operate Time: 15 msmax.
  • Max. Release Time: 3 msmax.
  • Insulation Resistance: Min. 1,000 MOhm, at 500 VDC
  • Surge Strength: 10,000 V (at 1.2*50us)

images/can-open-master-modules.jpg

Tiny Ethernet Module With Digital Output (tEt A4/tPET-A4/tET)

Main Features
  • Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave)
  • Contains a 32-bit MCU that efficiently handles network traffic
  • 10/100 Base-TXEthernet,RJ-45x1
  • (Auto-negotiating, Auto MDI/MDIX, LED Indicator)
  • Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
  • Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols
  • Supports UDP responder for device discovery
  • Supports web configuration and firmware update via Ethernet
  • Isolated digital input and output
  • Supports latched DI and 32-bit high-speed counter functions
  • Supports I/O pair-connection through the Ethernet
  • Dual-watchdog with power-on and safe value
  • Tiny form-factor with easy DIN-Rail mounting
  • RoHS compliant, no Halogen
  • Low power consumption (about 1.7 W only)

images/can-2000-series-remote.jpg

Isolated 16 - ch Do EtherCAT Slave I/O Module (ECAT-2045)

Main Features
  • On the fly processing: EtherCAT
  • Powerful MCU handles efficient network traffic
  • 2 x RJ-45 bus interface
  • Distance between stations up to 100 m (100BASE-TX)
  • Support daisy chain connection
  • EtherCAT conformance test tool verified
  • Removable terminal block connector
  • LED indicators for the output status
  • Built-In isolated 16-ch digital outputs
  • RoHS compliant
  • ESD Protection 4 KV Contact for each channel

images/can-modules-pci-type.jpg